An efficient detailed layer model for prediction of separator damage in a Li-Ion pouch cell exposed to transverse compression
Alexander Schmid, Christian Ellersdorfer, Marco Raffler, Nils Karajan, Florian Feist
Abstract
Li-ion pouch cells can be understood as thin-layer laminates. Pressure loads normal to flat electrodes can cause failure or thermal runaway. However, detailed models for investigating transverse pressure loads in which each layer is resolved are computationally intensive. This paper outlines two approaches for time-efficient yet accurate detailed explicit finite element models of a cell. Both approaches are characterised by the fact that they are divided into in-plane and out-of-plane behaviour. The modelling of interlaminar contacts is completely omitted, to prevent parasitic contact compliance and efforts for contact handling. A discrete element formulation is used for a computationally efficient simulation of transverse loads. This prevents a reduction of the critical time step, which can result from transversal deformations. The difference between the two modelling approaches lies in the modelling of the out-of-plane behaviour. In the first approach, the behaviour in the out-of-plane direction is generated by characterising each component separately. The second approach assumes homogenous behaviour in the thickness direction. Both approaches rely on characterization data derived from component and cell tests. The cell models are validated against cell tests. Numerical results obtained with the two modelling approaches differ only slightly from the validation data.