Marginal adaptation of three-unit interim restorations fabricated by the CAD-CA systems and the direct method before and after thermocycling
Leyla Sadighpour, Farideh Geramipanah, Mehran Falahchai, Hasan Tadbiri
Abstract
BACKGROUND: Limited information is available regarding the marginal adaptation of three-unit interim restorations fabricated by different techniques from different materials. Also, the efficacy of computer-aided design/computer-aided manufacturing (CAD-CAM) systems for their fabrication is still questionable. This study aimed to assess the marginal adaptation of three-unit interim restorations fabricated by the CAD-CAM systems and the direct method from different materials before and after thermocycling. MATERIAL AND METHODS: A sound mandibular second premolar and a second molar were prepared for a three-unit all-ceramic restoration. Metal dies were fabricated to simulate a case of mandibular first molar missing, and were mounted in an acrylic block. Seventy-two three-unit interim restorations were fabricated by different techniques from different materials in six groups (n=12). In the first four groups, restorations were fabricated from Tempron, Visalys Temp, Unifast III, and Acropars by the direct technique, while the Amann Girrbach and Arum CAD-CAM systems and Ceramill Temp blocks were used in the last two groups. Marginal gap in each group was measured under a stereomicroscope at ×100 magnification. The specimens then underwent 5000 thermal cycles (5-55°C), and the marginal gap was measured again afterwards. ANCOVA and Bonferroni test (for pairwise comparisons) were applied for statistical analyses (α=0.05). RESULTS: <0.001). CONCLUSIONS: Dental marginal adaptation, interim dental prosthesis, CAD-CAM.