Hydrogen Stability and Bonding in SiN<sub><i>x</i></sub> and Al<sub>2</sub>O<sub>3</sub> Dielectric Stacks on Poly-Si/SiO<sub><i>x</i></sub> Passivating Contacts
Matthew B. Hartenstein, William Nemeth, David L. Young, Paul Stradins, Sumit Agarwal
Abstract
Polycrystalline Si on SiO x passivating contacts enables some of the highest efficiency single-junction Si photovoltaic devices, but the high-temperature firing process needed for industrial metallization can significantly reduce passivation. We show that after firing, the implied open-circuit voltage, i V oc, for the Al 2 O 3 /SiN x /poly-Si/SiO x /c-Si stack is 20–30 mV higher than the SiN x /Al 2 O 3 /poly-Si/SiO x /c-Si stack and therefore provides better passivation of the SiO x /c-Si interface. Using effusion measurements and Fourier transform infrared spectroscopy, we demonstrate that more than twice as much hydrogen is retained in the dielectric up to the peak firing temperature of ∼800 °C for Al 2 O 3 -capped structures. If the Al 2 O 3 layer is not present in the stack, after firing, the i V oc is lower by 50–100 mV compared to Al 2 O 3 /SiN x or SiN x /Al 2 O 3 stacks. These studies will inform future work on the role of dielectrics in aiding the passivation of poly-Si/SiO x passivating contacts.