Sand Migration Simulation during Gas Production from Gas Hydrate Reservoir at Kuparuk 7–11–12 site in the Prodhoe Bay Unit, Alaska

Abstract

Uncontrolled sand production impedes continuous gas production from a hydrate reservoir as observed in the past field-scale gas production tests. Sand mobilization is strongly linked with sediment deformation and high pressure gradient. Sand production occurs when the mobilized sands reach the well. Throughout gas production from a hydrate reservoir, because of hydrate dissociation, deformation and pressure gradient change both in time and space. Therefore, it is necessary to consider the entire process to identify where sand is likely mobilized and how much mobilized sand could reach the well. This study utilizes a coupled thermal, hydrological, chemical, and mechanical (thermo-hydro-chemo-mechanical) sand migration model to simulate a year long gas production from the hydrate reservoir at the Kuparuk 7–11–12 site in the Prodhoe Bay Unit, Alaska. It is found that sand would mainly come from the lower portion of the production zone where faster hydrate dissociation occurs. The relatively faster hydrate dissociation coupled with the fact that hydrate-bearing sediments and hydrate-free sediments have similar stiffness but different strengths causes complex stress transfer, which results in excessive shear deformation when the upper portion of the production zone starts to dissociate. This is evident not only near the well but also away from the well, leading to a large amount of sand mobilization. Another focus of the modeling study is evaluation of the effect of sand migration on gas production. The comparison of two extreme cases─with sandscreen and without sandscreen─suggests that migrated and settled solids around a sand control device can prevent pressure drop across the near-wellbore zone and lead to reduction of the gas production rate.

Topics & Concepts