First Demonstration of 25-nm Quad Interface p-MTJ Device With Low Resistance-Area Product MgO and Ten Years Retention for High Reliable STT-MRAM
K. Nishioka, S. Miura, H. Honjo, Hiroshi Inoue, Takaya Watanabe, T. Nasuno, Hiroshi Naganuma, T. V. A. Nguyen, Y. Noguchi, M. Yasuhira, Shoji Ikeda, Tetsuo Endoh
Abstract
We successfully developed 25-nm quad CoFeB/MgO-interfaces perpendicular magnetic tunnel junction (quad-MTJ) with enough thermal stability. To fabricate the quad-MTJ, a physical vapor deposition (PVD) process for depositing novel free layer and low resistance-area (RA) product MgO layer and low-damage fabrication processes were developed. The developed quad-MTJ technology and advanced process bring better tunnel magneto resistance (TMR) ratio and RA to quad-MTJ than those of double-interface MTJ (double-MTJ), even though quad-MTJ has an additional MgO layer. Scaling down the MTJ size to 25 nm, we demonstrated the advantages of quad-MTJ compared with double-MTJ as follows: 1) two times larger thermal stability factor (Δ), which results in over ten years retention; 2) superiority of large Δ in the measuring temperature range up to 200 °C; 3) ~1.5 times higher write efficiency; 4) lower write current at short write pulse regions at less than 100 ns; and e) excellent endurance of over 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sup> thanks to higher write efficiency, which results from the reduced voltage owing to low RA and the low damage integration process technology. As a result, the developed quad-MTJ technologies will open the way for the realization of high-density STT-MRAM with low power, high speed, high reliability, and excellent scalability down to 2× nm node.