In Situ Electrochemical Activation Derived Li<i><sub>x</sub></i>MoO<i><sub>y</sub></i> Nanorods as the Multifunctional Interlayer for Fast Kinetics Li‐S batteries
Tengyu Li, Yanan Li, Jin‐Lin Yang, Yirui Deng, Mengwei Wu, Qi Wang, Ruiping Liu, Ben Ge, Xiaokun Xie, Jianmin Ma
Abstract
Abstract Li‐S batteries (LSBs) have attracted worldwide attention owing to their characteristics of high theoretical energy density and low cost. However, the commercial promotion of LSBs is hindered by the irreversible capacity decay and short cycling life caused by the shuttle effect of lithium‐polysulfides (LiPSs). Herein, a hybrid interlayer consisting of MoO 3 , conductive Ni foam, and Super P is prepared to prevent the shuttle effect and catalyze the LiPSs conversion. MoO 3 with a reversible lithiation/delithiation behavior between Li 0.042 MoO 3 and Li 2 MoO 4 within 1.7–2.8 V versus Li/Li + combines the Li + insertion and LiPSs immobilization and efficiently improve the LSBs redox kinetics. Benefiting from the reversible Li + insertion/extraction in lithium molybdate (Li x MoO y ) and the highly conductive Ni foam substrate, the sulfur cathode coupled with such electrochemical activation derived catalytic interlayer exhibits a high initial discharge capacity of 1100.1 mAh g −1 at a current density of 1 C with a low decay rate of 0.09% cycle −1 . Good capacity retention can still be obtained even the areal sulfur loading is increased to 13.28 mg cm −2 .