Effect of Doping Sb<sub>2</sub>O<sub>3</sub>NPs on Morphological, Mechanical, and Dielectric Properties of PVA/PVP Blend Film for Electromechanical Applications
Karar Abdali, Bahaa H. Rabee, Ehssan Al‐Bermany, Ali R. Abdulridha, Khalid Haneen Abass, Ashraq Mohammed Kadim
Abstract
In this work, antimony trioxide nanoparticles (Sb 2 O 3 NPs)-doped polyvinyl alcohol (PVA[Formula: see text]) and polyvinyl pyrrolidone (PVP[Formula: see text]) (i.e., PVAP@[Formula: see text]Sb 2 O 3 NPs, [Formula: see text], and 0.04) composite films were prepared using the casting method. Light optical microscopy (LOM), scanning electron microscopy (SEM), and Fourier infrared spectrums (FTIR) were used to investigate PVAP@[Formula: see text]Sb 2 O 3 NPs films. Sb 2 O 3 NPs were well dispersed within the matrix. FTIR showed a strong interaction between the matrix material and NPs. The density increased by up to 75% after adding 0.04[Formula: see text]wt.% of Sb 2 O 3 NPs. The mechanical ultrasound properties (MUS) were measured with different ultrasound frequencies in the ranges of (25, 30, 35, 40 and 45[Formula: see text]kHz). MUS coefficients such as ultrasonic velocity, absorption coefficient, and bulk modules were significantly improved after the impact of NPs by up to 20%, 115% and 230%, respectively. The reduction of electrical properties such as dielectric and loss constant was associated with an increase in frequency. The dielectric constant of PVAP@Sb 2 O 3 NPs was increased by about 80% after loading. AC electrical conductivity revealed an improvement with an increase in frequency and loading ratio. The results demonstrate a promising material for electromechanical, energy harvesting, and pressure sensor applications.