Low‐Oxidized Siloxene Nanosheets with High Capacity, Capacity Retention, and Rate Capability in Lithium‐Based Batteries
David J. Arnot, Wenzao Li, David C. Bock, Chavis A. Stackhouse, Xiao Tong, Ashley R. Head, Esther S. Takeuchi, Kenneth J. Takeuchi, Shan Yan, Lei Wang, Amy C. Marschilok
Abstract
Abstract The mechanical degradation experienced by Si electrodes during Li (de)alloying reactions can potentially be mitigated by using Si‐based materials with layered 2D geometries. Such materials are expected to exhibit favorable mechanical properties and be capable of buffering the volume change associated with (de)lithitation. In this work, 2D siloxene nanosheets are synthesized using a facile topotactic reaction followed by ultrasonication as an exfoliation step. Detailed structural and chemical characterization via electron microscopy, X‐ray photoelectron spectroscopy (XPS), and Raman spectroscopy is conducted, revealing a low‐oxidized siloxene nanosheet material with only 15% surface Si‐oxide. The obtained siloxene nanosheets are tested as Li‐ion negative electrodes in lithium‐based electrochemical cells. The cells exhibit high rate capability with a capacity of 935 mAh g –1 at 3200 mA g –1 and ≈99.5% coulombic efficiency. The inclusion of fluoroethylene carbonate (FEC) in the electrolyte improves capacity retention over 200 cycles from 13% to 77% at 1000 mA g –1 . This behavior is attributed to the FEC decomposition forming a solid electrolyte interphase (SEI) with higher ion conductivity and robust LiF/Li x PO y F z content, as characterized via XPS Raman spectroscopy.