Comprehensive Comparison of 22C3 and SP263 PD-L1 Expression in Non-Small-Cell Lung Cancer Using Routine Clinical and Conditioned Archives
Sue Youn Kim, Taeeun Kim, Taeeun Kim, Chan Kwon Park, Hyoung Kyu Yoon, Young Jo, Hyo Rim Kim, In Sook Woo, Tae Jung Kim, Tae Jung Kim
Abstract
PD-L1 harmonization studies revealed a strong correlation between the 22C3 and SP263 assays in non-small-cell lung cancer (NSCLC). However, the assays’ characteristics have yet to be validated in a variety of clinical and analytical settings. The results of 431 NSCLC samples tested concurrently in routine clinical practice with the PD-L1 22C3 and SP263 assays were reviewed, and both assays were performed on 314 archives of surgically resected NSCLCs to assess PD-L1 expression in relation to variables such as FFPE block age and FFPE section storage condition. In routine clinical samples, 22C3 showed the highest concordance rate with 94.5% of SP263 tumor proportion score (TPS) ≥50% and 92.3% of SP263 TPS ≥1%, while SP263 showed a concordance rate with 79.6% of 22C3 TPS ≥50% and 89.9% of 22C3 TPS ≥1%. In the archival analysis, the high TPS of 22C3 and SP263 (versus TPS 1%) were significantly associated with a more recent block (<3 years versus ≥3 years) (p = 0.007 and p = 0.009, respectively). Only the TPS of 22C3 was reduced when FFPE sections were stored at room temperature compared to SP263. However, when stored at 4 °C, the storage duration had no effect on expression in either assay. For 22C3 TPS 1−49 percent and ≥50 percent (OR = 1.73, p = 0.006 and OR = 1.98, p = 0.002, respectively). There was a considerably larger chance of preserved 22C3 expression in recent room-temperature paraffin section storage, although SP263 demonstrated preserved expression in prolonged room-temperature section storage. Despite the good association between PD-L1 22C3 and SP263 in routine clinical samples, FFPE blocks older than 3 years and sections held at room temperature for more than 1 week may result in an underestimation of PD-L1 status, particularly for the 22C3 test. However, the SP263 assay was more sensitive under these conditions.