Robot‐based 6D bioprinting for soft tissue biomedical applications
Franziska B. Albrecht, Freia F. Schmidt, Christian Schmidt, Rainer Börret, Petra J. Kluger
Abstract
Within this interdisciplinary study, we demonstrate the applicability of a 6D printer for soft tissue engineering models. For this purpose, a special plant was constructed, combining the technical requirements for 6D printing with the biological necessities, especially for soft tissue. Therefore, a commercial 6D robot arm was combined with a sterilizable housing (including a high-efficiency particulate air (HEPA) filter and ultraviolet radiation (UVC) lamps) and a custom-made printhead and printbed. Both components allow cooling and heating, which is desirable for working with viable cells. In addition, a spraying unit was installed that allows the distribution of fine droplets of a liquid. Advanced geometries on uneven or angled surfaces can be created with the use of all six axes. Based on often used bioinks in the field of soft tissue engineering (gellan gum, collagen, and gelatin methacryloyl) with very different material properties, we could demonstrate the flexibility of the printing system. Furthermore, cell-containing constructs using primary human adipose-derived stem cells (ASCs) could be produced in an automated manner. In addition to cell survival, the ability to differentiate along the adipogenic lineage could also be demonstrated as a representative of soft tissue engineering.