Potential of using biomass based activated carbon for carbon dioxide capture
R. Maniarasu, Sushil Kumar Rathore, S. Murugan
Abstract
Abstract There are three major methods used to capture carbon dioxide (CO 2 ) which include post-combustion, pre-combustion and oxy-fuel combustion method. Post combustion method is a technically and economically possible for CO 2 capture. Generally, CO 2 is first separated from a gas stream which contains CO 2 and then captured. There are three main methods used to separate CO 2 viz., solvent separation, membrane separation and cryogenic separation. In post combustion, for capturing CO 2 different techniques such as absorption, adsorption, membrane and cryogenic distillation are used. Adsorption is the most commonly used method for CO 2 capture. Activated carbon obtained from charcoal is considered as a potential adsorbent material for CO 2 capture. In this study, potential of using activated carbon obtained from two biomass substances viz., coconut shell and palm shell were examined as the adsorbent materials which would be used to capture CO 2 . For this purpose, the surface area, porosity, surface morphology and functional groups of the samples of activated carbon chosen for the study were obtained by using Brunauer-Emmet-Teller (BET), Scanning electron microscope (SEM), Thermogravimetry (TGA) and Derivative thermogravimetry (DTG) respectively. The preparation of biomass based activated carbon, adsorption properties and characterization of adsorbents were studied and the results are presented in this paper.