Fabrication of graphene nanoplatelets reinforced Mg matrix composites via powder thixoforging
Pingbo Wang, Jun Shen, Tijun Chen, Qinglin Li, Xiaoan Yue, Ling Yun Wang
Abstract
A powder thixoforging route combined with slurry based mixing process was proposed to fabricate graphene nanoplatelets (GNPs) reinforced magnesium matrix composites (MgMCs). The originally spherical and ball-milled ZK60 powders were used as matrices, respectively. The mixing of 0.05 wt.% GNPs with the spherical powder led to GNPs clusters and degraded the mechanical properties of the composite. In contrast, with the addition of an optimal content (0.1 wt.%) of GNPs, the composite fabricated from ball-milled powder achieved a joint enhancement in tensile yield strength (52%) and fracture toughness (19%), demonstrating a pronounced strengthening efficiency of 650% and a good balance between strength and toughness. The ball-milled powder endowed the composite with a homogenous distribution of GNPs and a denser microstructure with reduced Mg-Zn eutectics, and the thixoforging process offered a well-bonded Mg/GNP interface, making full use of the strengthening and toughening potential of GNPs. Theoretical predication based on a modified shear-lag model suggested that load transfer dominated the strengthening mechanisms. In-situ tensile tests verified that crack deflection, secondary cracks and GNPs bridging mainly accounted for the toughening mechanisms. A numerical model with consideration of GNPs orientations was also established to understand the toughening effect from GNPs bridging.