COx -free H2 Production via Catalytic Decomposition of CH4 over Fe Supported on Tungsten oxide-activated Carbon Catalyst: Effect of Tungsten Loading
Hossein Bayahia, Anis H. Fakeeha, Salma A. Al‐Zahrani, Salwa B. Alreshaidan, Abdulrhman S. Al‐Awadi, Mohammed F. Alotibi, Rawesh Kumar, Ahmed S. Al‐Fatesh
Abstract
Production of COx-free H2 from CH4 (a major global warming contributor) over cheap catalysts is a dominant task for the scientific community to accomplish environmental-friendly clean H2 energy sources. Herein, a tungsten oxide-activated carbon-supported Fe catalyst is prepared by impregnation method, characterized by X-ray diffraction, surface area-porosity measurement, temperature programmed reduction/oxidation and thermogravimetry analysis. 30wt.%Fe supported tungsten oxide incorporated activated carbon catalyst is found superior to 30 wt% Fe supported on activated carbon incorporated tungsten oxide due to higher surface area and high concentration of reducible catalytic active sites. 30wt.%Fe impregnated over 25 wt%WO3-75 wt%activated carbon support catalyst has the highest concentration of reducible surface-active species and it had excellent performance among other tungsten oxide incorporated catalysts. The catalyst showed 66.04% CH4 conversion, 63.12% H2 yield and YH2 /CCH4 > 0.9 initially which didn’t fall below 35 % up to 160-minutes. Improper matching between the rate of carbon formation and the rate of diffusion over a highly crystalline 30Fe50W50Ac catalyst resulted in rapid deactivation.