Laser trimming for lithography-free fabrications of MoS2 devices
Yong Xie, Onur Çakıroğlu, Wenshuai Hu, Kexin He, Sergio Puebla, Thomas Pucher, Qinghua Zhao, Xiaohua Ma, Carmen Munuera, Andrés Castellanos-Gómez
Abstract
Abstract Single-layer MoS 2 produced by mechanical exfoliation is usually connected to thicker and multilayer regions. We show a facile laser trimming method to insulate single-layer MoS 2 regions from thicker ones. We demonstrate, through electrical characterization, that the laser trimming method can be used to pattern single-layer MoS 2 channels with regular geometry and electrically disconnected from the thicker areas. Scanning photocurrent microscope further confirms that in the as-deposited flake (connected to a multilayer area) most of the photocurrent is being generated in the thicker flake region. After laser trimming, scanning photocurrent microscopy shows how only the single-layer MoS 2 region contributes to the photocurrent generation. The presented method is a direct-write and lithography-free (no need of resist or wet chemicals) alternative to reactive ion etching process to pattern the flakes that can be easily adopted by many research groups fabricating devices with MoS 2 and similar two-dimensional materials.