β-crystals aied greater energy absorbing ethylene–propylene rubber in polypropylene blends for outstanding low-temperature toughness
Ruimiao Liang, Wenwen Yu, Jiahao Shen, Zhiyi Zhang, Zaifu Lin, Jiayi Wang, Lan Jia, Feng Chen, Yonggang Shangguan, Qiang Zheng
Abstract
Modulating the β -crystalline phase and adding elastomers have traditionally been used to overcome the brittleness of polypropylene (PP); however, the synergistic mechanisms of these components in enhancing low temperatures toughness remain insufficiently explored. A β -nucleating agent (TMB-5) was incorporated into the polypropylene/ethylene–propylene rubber (PP/EPR) system to address the challenges of enhancing low-temperature toughness. Under an extreme low-temperature condition of −40 °C, the PP/EPR/TMB-5 blends exhibit a remarkable enhancement in low-temperature toughness compared with PP/EPR blends, showing a 138 % increase to reach 38.3 kJ/m 2 . In addition, these blends demonstrate an 8.47 % increase in tensile strength at room temperature. The addition of TMB-5 provides numerous nucleation sites that facilitate the β -crystallization of polypropylene, leading to an increased content of β -crystals and a reduction in crystal grain size. Broadband dielectric relaxation spectroscopy shows that the constrained relaxation of EPR near the crystals shifts to higher temperatures with the formation of β -crystals. The lamellar structure of the β -crystals prevents the aggregation of EPR rubber domains during cooling process, resulting in reduced rubber particle spacing. Observations of remarkable shear deformation and extensive stress-whitening areas on the fracture surfaces of PP/EPR/TMB-5 blends upon impact at −40 °C, as opposed to PP/EPR blends, underpin that the lamellar structure of β -crystals within the composite material efficiently transmits stress further away, facilitating the involvement of more EPR particles in energy dissipation. This finding enables an in-depth investigation into the synergistic toughening mechanism and provides new insights into blends design with conventional rubber for extreme conditions. • The polypropylene composite with 30% elastomer maintains exceptional toughness at −40°C. • The β-crystals' lamellar structure prevents EPR rubber aggregation, reducing particle spacing. • Reduced EPR particle spacing and β-crystal lamellae enhance stress transmission and energy dissipation.