Effective Mechanical Properties Evaluation of Unidirectional and Bidirectional Composites Using Virtual Domain Approach at Microscale
Yasser Elmoghazy, Elamin Magdi Omer Abuelgasim, Seif Ahmed Osman, Yazan Rami Hussein Afaneh, Omran Mousa Adam Eissa, Babak Safaei
Abstract
In this investigation, a 3D micromechanical modeling methodology based on different types of unit cell configuration and representative volume element (RVE) is used to capture the micro-macro mechanical properties of unidirectional (UD) and bidirectional (BD) fiber-reinforced synthetic resin composites. In this regard, hexagonal unit cell and square unit cell were established in order to explore the influence of packing density on representative microstructure properties, considering no effects at the interphase zone between the fiber and the matrix. The virtual geometric generation of 2D-RVE fibres inclusion model process is driven by statistical Monte Carlo simulation algorithm, which is then incorporated into FE solver to develop 3D-BDC RVE laminate model within a virtual scheme. In addition, applying the linear constraint of displacement simulation ensures that the RVE behaves as expected under uniaxial and in-plane loading conditions, leading to more accurate results. This remote constraint helps capture the realistic behaviors of the UD and BD composites models and enables the evaluation of mechanical properties, deformation patterns, and stress distributions within the presented RVE. Received: 12 September 2023 | Revised: 11 October 2023 | Accepted: 16 October 2023 Conflicts of Interest Babak Safaei is the Editor-in-Chief for Archives of Advanced Engineering Science, and was not involved in the editorial review or the decision to publish this article. The authors declare that they have no conflicts of interest to this work.