Using Cooling System for Increasing the Efficiency of Solar Cell
Teba Nassir Sultan, Mansour S. Farhan, Haider TH. Salim ALRikabi
Abstract
Abstract According to future predictions, reliance will be largely on solar panels to provide electrical energy. Given its importance, the factors that maintain or increase its efficiency must be studied. Among the factors that reduce its efficiency are temperature, shade, dust and many others. The effect of the temperature on the performance and efficiency of a photovoltaic (pv) panel is the one of the main important facing the renewable energy, especially in hot regions, e g. South part of iraq. The high temperature to which the pv module is exposed in hot weather reduces the open circuit voltage and the efficiency. In this work, use two methods for cooling, namely water cooling and air cooling. The first method of cooling was air cooling by using dc fan that placed in the back of pv module. While the second method water cooling divided in two techniques, the first technique done by using two pieces of aluminum for cooling (water cooling blocks) placed in the rear of pv module and the second technique of water cooling by using copper perforated tube for spraying water placed in the front of pv module. The average of experimental results shows that the use of technique spraying water cooling are highest enhancement in efficiency than others techniques (water cooling blocks and dc fan) and more effective at high pv temperatures.