Protection of DC Microgrids Based on Complex Power During Faults in On/Off-Grid Scenarios

Abstract

The DC microgrid is an effective platform for integration of renewable energy sources, energy storage systems, and smart electronic loads. However, the integration of distributed generators can result weak fault currents with change in its direction during fault conditions, which lead to failure of conventional over-current relays with poor coordination. The above scenario may exhibits relay mal-operation and force the DC microgrid into blackout mode which is extremely undesirable. Thus, this paper proposes an complex power concept (real and imaginary), which can be extracted using Fast Fourier Transform (FFT) to construct the effective protection schemes for rapid short-circuit fault detection and fault isolation in a DC microgrid. To achieve fault isolation, solid-state DC circuit breakers are used in conjunction with proposed real and imaginary power, which is extracted from the total FFT power signal (i.e. by using bus voltage and line current). Further, the relay trip threshold value for real and imaginary power is also determined under various pole-pole (P-P) and pole-ground (P-G) fault scenarios in the DC microgrid. The proposed protection scheme is validated on simple and modified IEEE 9-bus DC microgrids under various P-P and P-G fault scenarios during On/Off-Grid modes through MATLAB/Simulink software. The simulation results reveal that the proposed protection scheme based on real and imaginary power has accurately identified the fault in the simulated DC microgrids. Thus, the proposed complex power based fault identification approach can be quite effective for protection of DC microgrids during On/Off-Grid scenarios.

Topics & Concepts