Performance of concrete produced with alkali-activated artificial aggregates
Gopal Bharamappa Bekkeri, Kiran Kumar Shetty, Gopinatha Nayak
Abstract
Abstract The excessive use of natural aggregates raises mining activity. Further, it leads to environmental damage, which can be reduced using artificial aggregates produced from waste powdered materials. This study discussed the production process of alkali-activated artificial coarse aggregates and how their use affects the behavior of concrete. The different concrete mixtures were designed by replacing natural aggregates with artificial ones at different percentages. Various tests were conducted to determine concrete’s fresh, hardened, permeability, and microstructural characteristics. The result showed that concrete incorporated with artificial aggregates can achieve higher workability and lower density than natural aggregate concrete. The mechanical strengths were slightly decreased as the percentage addition of artificial aggregates in a mix increased. However, adding up to 50% showed comparable results to natural aggregate concrete. The water permeability and chloride ion penetration were within the standard limits for all the mixes. The scanning electron micrographs showed a solid and compact ITZ between the phases. XRD pattern revealed that the addition of artificial aggregates had not changed the mineralogical composition of the concrete; the formation of hydrated products helps concrete obtain strength. The study concluded that artificial aggregates could effectively replace natural coarse aggregate in producing structural concrete with many advantages.