Lithium Incorporation into TiO<sub>2</sub> Photoanode for Performance Enhancement of Dye-Sensitized Solar Cells
Sanjay Kumar Swami, Neetesh Kumar, Daniela R. Radu, Sung Woon Cho, Jongsu Lee
Abstract
Dye-sensitized solar cells (DSSCs) are one of the most favorable solar cell technologies owing to their low cost and ease of fabrication. The electron transport layer, consisting of a mesoporous titanium oxide (TiO 2 ) photoanode, plays a crucial role in DSSCs. In this study, we performed a post-lithium (Li) treatment on TiO 2 films to enhance the optoelectronic features and power conversion efficiency (PCE) of DSSCs. The material properties of pristine and Li-treated TiO 2 films were examined by X-ray diffraction (XRD), atomic force microscopy (AFM), steady-state photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS). Li treatment was confirmed to suppress defects and enhance the crystallinity of the TiO 2 films. Furthermore, TiO 2 films sensitized with N719 dye were used as photoanodes and Pt as a counter electrode for the fabrication of DSSCs. The devices with 0.1 M Li-TFSI treatment showed a performance improvement of ∼20%, with a PCE of 10.5%, while the control DSSC had a PCE of 8.7%. The device performance was significantly enhanced owing to improved structural properties, efficient charge transport, and suppression of recombination owing to the passivation of trap states.