Concrete with high-purity volcanic glass fine powder manufactured from pyroclastic deposit
Atsushi TOMOYOSE, Takafumi Noguchi, K. Sodeyama, Kazuro HIGASHI
Abstract
Abstract Volcanic deposits, which are pozzolanically reactive, have long been known to improve the durability of concrete. Nevertheless, it has also been pointed out that the use of a natural pozzolan as a supplementary cementitious material (SCM) can pose problems of low workability and slow strength development. Also, in addition, its composition and physical properties have large variety and variability. We have been conducting studies on the total utilization of volcanic deposits for applications suitable for respective properties by classifying them by floating speed difference and particle diameter. It is reported that sorting out particles less than 2.4 g/cm 3 by dry gravity classification and removal of smaller clay fraction by dust collector is technically effective to recover high purity volcanic glass from pyroclastic flow deposits called “Ito-Shirasu”, which is a local name for pyroclastic flow deposits in Japan. In this study, concrete containing high-purity volcanic glass powders with different finenesses are investigated regarding fresh properties, strength development, chloride ion penetration and CO 2 reduction. As a result, it was found that volcanic glass powders made an excellent contribution to the improvement of flowability comparable to fly ash, the enhancement of strength comparable to silica fume, and the restraint of chloride ion penetration. Volcanic glass powders can also contrbute to the reduction of CO 2 emission because the content of Portland cement can be significantly reduced to obtain the same strength compared to concrete with 100% Portland cement. This study provides a possibility to produce high performance SCMs in volcanic regions worldwide from volcanic ejecta by sorting out a high purity volcanic glass by the same method.