Highly Efficient Dual-Buck Structured Buck–Boost AC–AC Converter With Versatile Identical Inverting/Noninverting Operations
Hafiz Furqan Ahmed, Omar Al Zaabi, Mohamed Shawky El Moursi, Khalifa Al Hosani
Abstract
Single-phase dual-buck ac–ac (DBAC) converters are gaining attention due to their intrinsic protection from shoot-through and open-circuit problems of conventional ac–ac converters. However, research works on DBAC converters are mainly concentrated around unipolar topologies. In a few developed bipolar topologies to date, the inverting buck–boost operations (for series voltage injection and step-variable frequency outputs) are inefficient and burdened by large voltage and current stresses ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">${v}_{\text{in}} + {v}_o\ \text{and}\ {i}_{\text{in}} + {i}_o$</tex-math></inline-formula> ) of switching devices and ripples of passive elements. In this article, an efficient dual-buck structured buck–boost ac–ac converter is proposed, with the following features: no voltage source shoot-through and inductor open-circuit problems, natural attainment of safe commutation without additional protection circuitry or complex control, no need for pulsewidth modulation dead times, and elimination of high-frequency conduction of <sc xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">mosfet</small> ’s body diodes and related slow reverse recovery issues. The proposed converter provides distinct types of efficient inverting and noninverting buck and boost operations, with smaller switch voltage/current stresses ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">${v}_{\text{in}}/{v}_o$</tex-math></inline-formula> and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\ {i}_{\text{in}}/{i}_o$</tex-math></inline-formula> ) and passive component ripples. Combined inverting and noninverting buck–boost operations are also proposed with separate tuning of buck and boost voltage transfer ratios. A simple adaptable switching strategy provides the switch control pulses for all circuit operations by modulating the buck and boost control reference signals. The proposed converter provides sustained input/output currents and performs well with nonresistive loads. Extensive theoretical analysis is presented followed by practical verifications on a 400-VA laboratory circuit.