Mechanical Behavior of Human Cancellous Bone in Alveolar Bone under Uniaxial Compression and Creep Tests
Bin Wu, Yang Wu, Mao Lıu, Jingjing Liu, Di Jiang, Songyun Ma, Bin Yan, Yi Lu
Abstract
In the process of orthodontic treatment, the remodeling of cancellous bone in alveolar bone (in this paper, cancellous bone in alveolar bone is abbreviated as CBAB) is key to promoting tooth movement. Studying the mechanical behavior of CBAB is helpful to predict the displacement of teeth and achieve the best effect of orthodontic treatment. Three CBAB samples were cut from alveolar bone around the root apex of human teeth. A uniaxial compression test was used to study the transient elastic properties of CBAB. A creep test was used to study the time-dependent viscoelastic properties of CBAB. Both tests were carried out at the loading rates of 0.02 mm/min, 0.1 mm/min and 0.5 mm/min. The results revealed that CBAB is a nonlinear viscoelastic and hyperelastic material. The stress−strain curve obtained from the uniaxial compression test could be divided into three stages: the collapse stage of the front section, the exponential stage of the middle section and the almost linear stage of the rear end. According to the strain−time curve obtained from the compression creep test, a trend of increasing strain over time was relatively obvious within the first 30 s. After 200 s, the curve gradually tended to plateau. Four hyperelastic models and three viscoelastic models were used to fit the test data. Finally, the fifth-order polynomial hyperelastic model (coefficient of determination “R2 > 0.999”) was used to describe the hyperelastic properties of CBAB, and the seven-parameter model of the generalized Kelvin modified model (“R2 > 0.98”) was used to describe the viscoelastic properties of CBAB.