A Fully Integrated 135-GHz Direct-Digital 16-QAM Wireless and Dielectric Waveguide Link in 28-nm CMOS
Carl D’heer, Patrick Reynaert
Abstract
This article presents a fully integrated direct-digital 16-quadrature amplitude modulation (QAM) communication link operating at 135 GHz. The transmitter employs a Cartesian direct-digital modulation architecture capable of generating a low-EVM 16-QAM constellation without relying on high-speed digital-to-analog converters (DACs). The receiver performs on-chip 16-QAM demodulation in the analog domain by means of pulse amplitude modulation (PAM-4) decoders, obviating the need for high-speed analog-to-digital converters (ADCs). The transmitter and receiver chips were fabricated in 28-nm CMOS and were used to establish both a wireless and a dielectric waveguide (DWG) link via off-chip Vivaldi antennas. The transmitter achieves a saturated output power of 0 dBm, while the receiver demonstrates a conversion gain and minimum noise figure of 25 and 6 dB, respectively. A data rate of 32 Gb/s with a 9-pJ/b energy efficiency was achieved over a wireless channel with on-chip 16-QAM modulation and demodulation and without any offline digital signal processing (DSP). Over a DWG channel, a data rate of 24 Gb/s was demonstrated with a link efficiency of 12 pJ/b. This work presents the first fully integrated 16-QAM link with on-chip modulation and demodulation in the sub-terahertz (THz) frequency range.