Effect of Mg content in the La3-xMgxNi9 battery anode alloys on the structural, hydrogen storage and electrochemical properties
ChuBin Wan, Weikang Hu, R.V. Denys, Christopher C. Nwakwuo, Jan Ketil Solberg, V.A. Yartys
Abstract
The present work is focused on the studies of structure, hydrogen storage and electrochemical properties of the La3-xMgxNi9 (x = 1.0, 1.1 and 1.2) alloys as active materials of negative electrodes in the Nickel-Metal Hydride (Ni/MH) batteries. A change of Mg content affects properties of the studied alloys such as the phase homogeneity, hydrogen storage and electrochemical capacities, cycle stability, and high-rate discharge performance. X-ray diffraction study shows that Mg substitution for La and annealing of the La3-xMgxNi9 alloys promotes the formation of more homogeneous materials, with a predominant formation of the target AB3 PuNi3 structure type intermetallics. The electrodes prepared from the annealed alloys show the maximum discharge capacities of ∼400 mAh g−1 at discharge current density of ∼60 mA/g. The high rate discharge-abilities (HRD) at the discharge current density of 350 mA g−1 keep high values of the remaining reversible discharge capacities, ∼86, 85 and 80%, for the La2MgNi9, La1·9Mg1·1Ni9 and La1·8Mg1·2Ni9 alloy electrodes, respectively. After 200 cycles with 100% depth of discharge (DOD), the La1·9Mg1·1Ni9 alloy electrode exhibits a very good cycling stability with its discharge capacity remaining at a level of ∼64% of its initial capacity.