Interface‐ and Surface‐Engineered PdO−RuO<sub>2</sub> Hetero‐Nanostructures with High Activity for Hydrogen Evolution/Oxidation Reactions
Rajib Samanta, Ranjit Mishra, Sudip Barman
Abstract
Abstract Active catalysts for HER/HOR are crucial to develop hydrogen‐based renewable technologies. The interface of hetero‐nanostructures can integrate different components into a single synergistic hybrid with high activity. Here, the synthesis of PdO−RuO 2 −C with abundant interfaces/defects was achieved for the hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR). It exhibited a current density of 10 mA cm −2 at 44 mV with a Tafel slope of 34 mV dec −1 in 1 m KOH. The HER mass activity was 3 times higher in base and comparable to Pt/C in acid. The stability test confirmed high HER stability. The catalyst also exhibited excellent HOR activity in both media; in alkaline HOR it outperformed Pt/C. The exchange current density i 0,m of PdO−RuO 2 /C was 522 mA mg −1 in base, which is 58 and 3.4 times higher than those of Pd/C and Pt/C. The HOR activity of PdO−RuO 2 /C was 22 and 300 times higher than those of PdO/C in acid and base. Improvement of HER/HOR kinetics in different alkaline electrolytes was observed in the order K + <Na + <Li + , and increase of HER as well decrease of HOR kinetics was observed with increasing Li + concentration. It was proposed that OH ad ‐M + ‐(H 2 O) x in the double‐layer region could influence HER/HOR activity in base. Based on the hard and soft acid and base (HSAB) theory, the OH ads ‐M + ‐(H 2 O) x could help to remove more OH ads into the bulk, leading to increase in HER/HOR activity in alkaline electrolyte (K + <Na + <Li + ) and increasing the HER with increasing Li + concentration. The decrease of HOR activity of PdO−RuO 2 /C with increasing M + was due to M + ‐induced OH ads destabilization through the bifunctional mechanism. The high HER/HOR activity of PdO−RuO 2 /C could be attributed, among other factors, to interface engineering and strong synergistic interaction. This work provides an opportunity to design oxide‐based catalysts for renewable energy technologies.