Enhanced FPGA linear phase FIR filter with amalgam multiplier
M Sakthimohan, J. Deny, K. Umapathi, Hady H. Fayek
Abstract
Designing high-performance integrated circuits that balance area, speed, and power is increasingly challenging. This study optimises hardware implementation of FIR filters using an innovative Amalgam Multiplier, minimising resource use without compromising performance. The key challenge in designing signal processing hardware is the multiplier design, which significantly affects efficiency. This study explores integrated circuit optimisation, addressing the delicate balance between area utilisation, speed, and power consumption. Focusing on hardware implementation of Finite Impulse Response (FIR) filters in signal processing, the article starts with a conventional FIR filter design using a standard array multiplier which consumed 1.790 W, with 8 s real-time completion. Then, Linear Phase FIR (LP-FIR) filter is designed using Braun and Dadda Multiplier. LP-FIR filter with Braun multiplier consumed 1.436 W power and 26 s of completion time whereas LP-FIR with Dadda multiplier consumed 1.363 W power and 23 s of completion time. Finally, the implementation of novel LP-FIR enhanced by Amalgam multiplier consumed 0.302 W power and 10.29 s of completion time, marking a significant advancement in integrated circuit design.