Self-stratification studies in waterborne epoxy-silicone systems
Spardha Jhamb, Huichao Bi, Claus Erik Weinell, Georgios M. Kontogeorgis, Kim Dam‐Johansen
Abstract
Waterborne epoxy‑silicone coating formulations are prepared by combining selected ingredients in optimum quantities to produce ~250–275 μm films (dry film thickness, DFT) applied on polyester, sandblasted steel, smooth steel, acrylic, polypropylene and aluminum substrates. The self-stratification of the applied coatings is then evaluated using Fourier Transform Infrared spectroscopy – Attenuated Total Reflectance (FTIR–ATR) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray (EDX) analysis. The difference in the absorption spectra of the top and bottom surfaces of these films as well as a significant difference in topography seen from the SEM images and elemental mapping through an EDX analysis of the cross-section has confirmed the occurrence of stratification on polyester substrate. The observed stratification results are subsequently compared with a theoretical model where the primary mechanism driving the separation is assumed to be the surface free energy difference of the resins and their respective wetting of the substrate. The influence of using two different theories, Wu's Harmonic Mean Method and Owens-Wendt Method for the interfacial surface tensions and the solid surface free energy computations, on the predictions from this model is also tested. The theoretical predictions support the observed results for most cases of the formulated waterborne systems; except for the case of sandblasted steel, the observed results do not match the predictions. The possible reasons for the difference in between the prediction and observation for this specific case has also been elucidated.