Litcius/Paper detail

A compact simple microstrip lowpass filter based on elliptical analyzed resonator

Mohsen Hayati, Saeedeh Lotfi, Hesam Siahkamari, Tomáš Blecha, Richard Linhart, Mohammad Jamshidi

2021Frequenz13 citationsDOIOpen Access PDF

Abstract

Abstract In this article, a compact microstrip lowpass filter (LPF) using elliptical shaped resonators with ultra-wide stopband is rendered. In this respect, LC equal structures of the elliptical shaped resonators are calculated based on the formula of circumference. In addition, to calculate transmission zeros of the presented elliptical shaped resonator, the LC equal structure and its output to input ratio are employed. The proposed LPF has a −3 dB cut-off frequency at 1.50 GHz and the stopband bandwidth of the designed filter is about 13 f c, which refers to its ultra-wide stopband. The occupied circuit size of the presented filter is 0.151 λ g × 0.044 λ g ( λ g is the guided wavelength at 1.50 GHz). The designed filter is fabricated on RT/Duroid 5880 substrate. The results of the fabricated and designed filter have clearly demonstrated that not only has the proposed LPF shown a suitable agreement between measured and simulated S -parameters, but also an appropriate stopband bandwidth.

Topics & Concepts

StopbandElliptic filterResonatorMicrostripLow-pass filterBandwidth (computing)Filter (signal processing)Prototype filterTransition bandm-derived filterMaterials scienceOpticsAcousticsPhysicsElectronic engineeringTelecommunicationsComputer scienceEngineeringElectrical engineeringMicrowave Engineering and WaveguidesAdvanced Antenna and Metasurface TechnologiesAntenna Design and Analysis