Electrochemical Behavior and Surface Conductivity of C/TiC Nanocomposite Coating on Titanium for PEMFC Bipolar Plate
Wei Meng, Haifeng Zhu, Xiaopeng Wang, Guanghui Li, Yingze Fan, Deen Sun, Fantao Kong
Abstract
In this study, a C/TiC nanocomposite coating has been prepared by magnetron sputtering technology and vacuum heat treatment technology on a titanium surface, which is used for bipolar plates (BPs) in a proton exchange membrane fuel cell (PEMFC). This prepared C/TiC nanocomposite coating was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, electrochemical testing and interfacial contact resistance (ICR). The results show that a C/TiC nanocomposite coating consists of a single C surface layer (~28.88 nm) and TiC interface layer (~19.5 nm). In addition, compared with commercially pure titanium substrate (icorr = 345.10 μA cm−2), the corrosion resistance of a C/TiC nanocomposite coating (icorr = 0.74 μA cm−2) was greatly improved in 0.5 M H2SO4 + 5 ppm HF solution at 80 °C. The corrosion current density (icorr) decreased 3 orders of magnitude in a simulated cathodic environment. Moreover, the interfacial contact resistance of a C/TiC nanocomposite coating is 2.34 mΩ cm2 under 1.4 MPa compaction force, which is much lower than that of raw CP Ti (38.66 mΩ cm2).