Laser frequency stabilization in the 10 <sup>−14</sup> range via optimized modulation transfer spectroscopy on the <sup>87</sup>Rb D<sub>2</sub> line
Sanglok Lee, Geol Moon, Sang Eon Park, Hyun-Gue Hong, Jae Hoon Lee, Sangwon Seo, Taeg Yong Kwon, Sang-Bum Lee
Abstract
We present a high-performance laser frequency stabilization method using modulation transfer spectroscopy (MTS) on the rubidium 87 D 2 transition line. A substantial improvement of the laser frequency stability was achieved by searching for the optimal diameter and intensity settings of the probe and pump beam. The frequency instability measured from the beat frequency of two locked external cavity diode lasers (ECDLs) reached a short-term stability of <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"> <mml:mn>4.5</mml:mn> <mml:mo>×</mml:mo> <mml:msup> <mml:mn>10</mml:mn> <mml:mrow class="MJX-TeXAtom-ORD"> <mml:mo>−</mml:mo> <mml:mn>14</mml:mn> </mml:mrow> </mml:msup> <mml:mrow class="MJX-TeXAtom-ORD"> <mml:mo>/</mml:mo> </mml:mrow> <mml:msqrt> <mml:mi>τ</mml:mi> </mml:msqrt> </mml:math> and did not exceed 2 × 10 −12 until 10 5 s, which is the best performance reported thus far with a D 2 transition. The long-term stability is limited by the offset fluctuations of the baseline induced by the residual amplitude modulation (RAM), which can be further improved by reducing the current temperature variation of about 0.2 K by means of temperature stabilization or through a further reduction of the RAM.