Nanoparticle Formation and Behavior in Turbulent Spray Flames Investigated by DNS
Abouelmagd Abdelsamie, Frank Einar Kruis, Hartmut Wiggers, Dominique Thévenin
Abstract
Abstract This work is a first direct numerical simulation of a configuration closely related to the SpraySyn burner (Schneider et al. in Rev Sci Instrum 90:085108, 2019). This burner has been recently developed at the University of Duisburg-Essen to investigate experimentally nanoparticle synthesis in spray flames for a variety of materials. The present simulations are performed for ethanol and titanium tetraisopropoxide as a solvent and precursor, respectively, in order to produce titanium dioxide nanoparticles. In the direct numerical simulations, the complete scenario leading to the production of well-defined nanoparticles is taken into account, including evaporation of the liquid mixture (solvent and precursor) injected as a spray, multi-step kinetics for gas-phase combustion, and finally nanoparticle synthesis. The employed models are described in this article. Additionally, the impact of the inlet velocity of the pilot flame on the nanoparticle synthesis is investigated. It has been found that increasing this speed delays spray flame ignition, decreases nanoparticle concentration, but leads to a narrower size distribution at early stage.