Cement-Based Mortars with Waste Paper Sludge-Derived Cellulose Fibers for Building Applications
Francesco Bencardino, Pietro Mazzuca, Ricardo do Carmo, Hugo Costa, Roberta Curto
Abstract
This study assesses the mechanical properties of mortars incorporating waste paper sludge-derived cellulose fibers. Compression and flexural tests were carried out on specimens prepared with cellulose fibers at different proportions, ranging from 0% to 2% of the total weight of the solid mortar constituents (cement, sand, and lime). In addition, a comparative analysis was carried out to evaluate the influence of the preparation method on the mechanical properties of the mortars. To this end, two series of mortars were studied: one prepared following a rigorous control of the preparation parameters and the other made without systematic parameter control to simulate typical on-site conditions. Finally, the applicability of both traditional and eco-friendly mortars in the construction of small-scale masonry walls was assessed through compression tests. Overall, the mechanical properties of mortars with cellulose fibers were comparable to those with 0% waste material, regardless of the production process. Regarding the compressive behavior of masonry walls, experimental tests showed significant similarities between specimens made with traditional and eco-friendly mortar. In conclusion, incorporating cellulose fibers into cement-based mortar shows considerable potential for building applications, enhancing the environmental benefits without compromising the mechanical behavior.