Three-dimensional simulation and experimental validation of solar air heater having sinusoidal rib
Sudhir Kumar, Suresh Kant Verma
Abstract
A new geometry of roughness in the sinusoidal form has been investigated computationally using Computational Fluid Dynamics (CFD) software for examining the influence of roughness on heat transfer and fluid friction in solar air heater and results obtained have been compared with experimental results. The simulated results for smooth solar air heater are compared with Dittus-Boelter equation for heat transfer and Blasius equation for fluid friction. The deviation of simulated results are found to be 7.55% and 16.91%, respectively. In order to validate the simulated results experimental test rig was fabricated and experiments were carried out for the same set of parameters used in the simulation. The experimental results indicate that for the roughened absorber plate having a sinusoidal rib, the variation in heat transfer is within 9% from that of simulated results and for fluid friction, deviation is within 4%. The optimal value of thermohydraulic performance (THP) is obtained 2.05 for roughness pitch (P) = 10 mm and Reynolds number (Re) = 4000, where enhancement ratio of Nusselt number (Nur/Nus) and friction factor (ƒr/ƒs) are 2.48 and 1.76, respectively. The experimental value of THP is found to be within 6.77% of the value indicated by CFD analysis. The results are also compared with the triangular and square rib and found that the optimal THP of the proposed rib is 20.06% and 33.31% more.