Influence of annealing temperature on microstructural evolution and tensile behavior of Ti−6Al−4V alloy manufactured by multi-directional forging
Shishuang Liu, Jianming Cai, Yi Zhou, Jingxia Cao, Wangfeng Zhang, Shenglong Dai, Xu Huang, Cao Chun-xiao
Abstract
A range of annealing treatments were implemented to regulate the microstructure and mechanical properties of Ti−6Al−4V forging. The results show that both the as-forged and as-annealed microstructures exhibit a bimodal structure composed of equiaxed primary α phase (αp) and transformed β phase (βt). With the increase of annealing temperature, the secondary α (αs) phase precipitates from the β phase. There is no obvious texture and the crystal orientation is uniformly distributed. Meanwhile, strength initially increases and then decreases, whereas ductility remains largely unaffected. The alloy annealed at 860 °C has an excellent combination of strength and ductility, due to the larger content of the fine αs phase. All fracture surfaces contain massive dimples, which is a typical ductile fracture feature. The characteristics of microcracks, microvoids, and kinked αp/αl (equiaxed αp and lamellar α phase) phases are found near the fracture.