Development of a Flexible Tunable and Compact Microstrip Antenna via Laser Assisted Patterning of Copper Film
S. Masihi, Masoud Shariat Panahi, Dinesh Maddipatla, A. K. Bose, X. Zhang, Anthony J. Hanson, Binu B. Narakathu, Bradley J. Bazuin, Massood Z. Atashbar
Abstract
Design and rapid prototyping of a tunable and compact microstrip antenna for industrial, scientific and medical (ISM) band applications is presented in this paper. Laser machining is introduced as a fast and accurate method for the antenna fabrication. The antenna, with an overall dimension of 65 × 46 × 0.127 mm, was fabricated by sandwiching a flexible Kapton polyimide substrate, with a dielectric constant of 3.5, between two flexible copper tapes, as the radiating patch and ground plane, respectively. The radiating patch was patterned in a meander configuration,with three slots, demonstrating the capability to reduce the resonant frequency of the microstrip antenna from 2.4 GHz to 900 MHz, without increasing the overall size of the antenna (87% compact). The effect of mechanical stress on the antenna performance was investigated by performing bend and stretch tests. The antenna was subjected to compressive bend with a minimum radius of curvature of 86 mm and 150 mm along the x-axis and y-axis which resulted in a maximum increase of resonant frequency by 3.1% and 1.3%, respectively. Similarly, the antenna was subjected to tensile bend with a minimum radius of curvature of 79 mm and 162 mm along the x-axis and y-axis which resulted in a maximum decrease of the resonant frequency by 4.2% and 0.3%, respectively. An overall 0.9% decrease in the resonant frequency was measured for an applied strain of 0.09% during stretching the antenna along the y-axis.