Mn-Co-Ni-O thin films prepared by sputtering with alloy target
Ruifeng Li, Qiuyun Fu, Xiaohua Zou, Zhiping Zheng, Wei Luo, Liang Yan
Abstract
Abstract The thin film of heat-sensitive materials has been widely concerned with the current trend of miniaturization and integration of sensors. In this work, Mn 1.56 Co 0.96 Ni 0.48 O 4 (MCNO) thin films were prepared on SiO 2 /Si substrates by sputtering with Mn–Co–Ni alloy target and then annealing in air at different temperatures (650–900 °C). The X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) analysis indicated that the main crystalline phase of MCNO thin films was spinel crystal structure; the surface of the thin films was very dense and uniform. The electrical properties of the thin films were studied in the temperature range of–5–50 °C. The MCNO thin film with a low room temperature resistance R 25 of 71.1 kΩ and a high thermosensitive constant B value of 3305 K was obtained at 750 °C. X-ray photoelectron spectroscopy (XPS) analysis showed that the concentration of Mn 3+ and Mn 4+ cations in MCNO thin films is the highest when annealing temperature is 750 °C. The complex impedance analysis revealed internal conduction mechanism of the MCNO thin film and the resistance of the thin film was dominated by grain boundary resistance.