Best practice for LDL-cholesterol: when and how to calculate
Janine Martins, Nicolene Steyn, H. Muller Rossouw, Tahir S. Pillay
Abstract
The lipid profile is important in the risk assessment for cardiovascular disease. The lipid profile includes total cholesterol, high-density lipoprotein (HDL)-cholesterol, triglycerides (TGs) and low-density lipoprotein (LDL)-cholesterol (LDL-C). LDL-C has traditionally been calculated using the Friedewald equation (invalid with TGs greater than 4.5 mmol/L and is based on the assumption that the ratio of TG to cholesterol in very- low-density lipoprotein (VLDL) is 5 when measured in mg /dL). LDL-C can be quantified with a reference method, beta-quantification involving ultracentrifugation and this is unsuitable for routine use. Direct measurement of LDL-C was expected to provide a solution with high TGs. However, this has some challenges because of a lack of standardisation between the reagents and assays from different manufacturers as well as the additional costs. Furthermore, mild hypertriglyceridaemia also distorts direct LDL-C measurements. With the limitations of the Friedewald equation, alternatives have been derived. Newer equations include the Sampson-National Institutes of Health (NIH) equation 2 and the Martin-Hopkins equation. The Sampson-NIH2 equation was derived using beta-quantification in a population with high TG and multiple least squares regression to calculate VLDL-C, using TGs and non-HDL-C as independent variables. These data were used in a second equation to calculate LDL-C. The Sampson-NIH2 equation can be used with TGs up to 9 mmol/L. The Martin-Hopkins equation uses a 180 cell stratification of TG/non-HDL-C to determine the TG:VLDL-C ratio and can be used with TGs up to 4.5 mmol/L. Recently, an extended Martin-Hopkins equation has become available for TGs up to 9.04 mmol/L.This article discusses the best practice approach to calculating LDL-C based on the available evidence.