Control of Shock-Induced Separation of a Turbulent Boundary Layer Using Air-Jet Vortex Generators
Deepak Prem Ramaswamy, Anne-Marie Schreyer
Abstract
An experimental analysis was carried out to study the control effectiveness and turbulence behavior of an array of steady air-jet vortex generators on a shock-induced boundary-layer separation. Control was applied to a 24° compression-ramp interaction at Mach 2.52 and . A parametric study varying the jet spacing revealed that an adequate interaction between the vortices is essential for effective control, and the most favorable control effect was achieved with a jet spacing of . This case was analyzed in more detail using particle image velocimetry. The results reveal a strong corrugation of the separation zone due to the injection of the jets with a substantial reduction in its area along the entire spanwise extent of the air-jet array, compared with the uncontrolled case. Measurements of velocity fluctuations along the interaction region also show that the jet injection results in a reduction in turbulent intensity after reattachment, contributing to an overall reduction in amplification factor across the interaction region. The expected increase in turbulent mixing, which is essentially responsible for the control effect, was confirmed in the region in-between jet injection and separation shock. Farther away from the surface, the flow is not affected, which reduces potential drag penalties.