Urban Building Energy Modeling with Parameterized Geometry and Detailed Thermal Zones for Complex Building Types
H.H. Xi, Qilin Zhang, Zhiyi Ren, Guangchen Li, Yixing Chen
Abstract
Urban building energy modeling (UBEM) has attracted wide attention to the requirement for global carbon emission reduction. This paper presents a UBEM tool, AutoBPS-Param, to generate building energy models (BEMs) with parameterized geometry and detailed thermal zones, especially for complex building types, considering the shading effect from surrounding buildings simultaneously. Three building number scales and four scenarios were analyzed in the hotel-related buildings in Changsha, China. For the prototype modeling of Scenario 1, eighteen prototype building energy models for six building types in three vintages were created, and their simulation results were aggregated based on their representative floor areas. For AutoBPS-Param of Scenario 4, the method created one EnergyPlus (Version: 9.3.0) model for each building. The geometry of the prototype model was scaled and modified based on the target building’s length, width, and number of stories. The surrounding buildings were also added to the AutoBPS-Param simulation to better capture the urban dynamic impact. The results showed that the annual electricity and natural gas energy use intensity (EUI) of the pre-2005 HotelOffice prototype model was 172.25 and 140.45 kWh/m2. In contrast, with the AutoBPS-Param method, the annual electricity EUIs of 71 HotelOffice buildings constructed before 2005 ranged from 159.51 to 213.58 kWh/m2 with an average of 173.14 kWh/m2, and the annual gas EUIs ranged from 68.02 to 229.12 kWh/m2 with an average of 108.89 kWh/m2. The proposed method can better capture the diversity of urban building energy consumption.