Influence of talc fillers on bimodal polyethylene composites for ground heat exchangers
Adib Kalantar Mehrjerdi, Dan Åkesson, Mikael Skrifvars
Abstract
Abstract In this study, a commercial grade of talc is used as filler in a bimodal high‐density polyethylene (HDPE) used for the pressure pipe application. The composites are characterized by thermogravimetric analysis (TGA), differential scanning calorimetry, dynamic mechanical thermal analysis, and tensile testing. The results illustrate that the presence of talc has a considerable effect on the material properties and the pipe life‐length. It is presented that the thermal stability measured by TGA is enhanced, while the oxidation induction time decreases in cooperation of the talc. The nucleation behavior of talc particles during crystallization has no obvious effect on melting temperature; however, an increase in crystallization temperature is evidenced. Storage modulus as recorded from the dynamic mechanical analysis is also increased in all composites, furthermore, the temperature of the α relaxation is shifted toward higher temperature and finally the strain hardening modulus for the HDPE/talc composites is assessed and compared to the neat HDPE as a measure of environmental stress crack resistance.