Hybrid Surface Modification and Bulk Doping Enable Spent LiCoO<sub>2</sub> Cathodes for High‐Voltage Operation
Zhenzhen Liu, Miaomiao Han, Shengbo Zhang, Huaimeng Li, Xi Wu, Zhen Fu, Haimin Zhang, Guozhong Wang, Yunxia Zhang
Abstract
Abstract The emerging market demand for high‐energy‐density of energy storage devices is pushing the disposal of end‐of‐life LiCoO 2 (LCO) to shift toward sustainable upgrading into structurally stable high‐voltage cathode materials. Herein, an integrated bulk and surface commodification strategy is proposed to render spent LCO (S‐LCO) to operate at high voltages, involving bulk Mn doping, near surface P gradient doping, and Li 3 PO 4 /CoP (LPO/CP) coating on the LCO surface to yield upcycled LCO (defined as MP‐LCO@LPO/CP). Benefiting from hybrid surface coating with Li + ‐conductive Li 3 PO 4 (LPO) and electron conductive CoP (CP) coupled with Mn and P co‐doping, the optimized MP‐LCO@LPO/CP cathode exhibits enhanced high‐voltage performance, delivering an initial discharge capacity of 218.8 mAh g −1 at 0.2 C with excellent capacity retention of 80.9% (0.5 C) after 200 cycles at a cut‐off voltage of 4.6 V, along with 96.3% of capacity retention over 100 cycles at 4.5 V. These findings may afford meaningful construction for the upcycling of commercial S‐LCO into next‐generation upmarket cathode materials through the elaborate surface and bulk modification design.