Effects of different laser welding parameters on the joint quality for dissimilar material joints for battery applications
Andreas Andersson Lassila, Dan Lönn, Tobias Andersson, Wei Wang, Rohollah Ghasemi
Abstract
For battery pack assemblies, it is crucial that the laser welded cell-to-busbar joints demonstrate both high mechanical strength and minimal electrical resistance. The present study investigates the effect of different laser welding parameters, on the mechanical strength, electrical resistance, porosity formation and joint microstructure, for dissimilar material cell-to-busbar joints. Laser welding experiments are performed, on thin nickel-plated copper and steel plates. The plates are joined in an overlap configuration, using laser beam wobbling and power modulation. Both circular and sinusoidal laser beam wobbling are used as selected strategies to increase the interface width of the joints, where also a comparison is made between the two methods. The joint quality is evaluated using joint geometry analysis, shear strength tests, computed tomography scanning and electrical resistance measurements. The results show that circular laser beam wobbling gives a larger joint shear strength compared with sinusoidal laser beam wobbling. In addition, it is observed that both the total pore volume and material mixing are significantly increased with increasing laser power and wobbling frequency for circular laser beam wobbling. However, for the sinusoidal laser beam wobbling the wobbling frequency does not show a significant impact on the total pore volume.