Improved scanning accuracy with newly designed scan bodies: An in vitro study comparing digital versus conventional impression techniques for complete‐arch implant rehabilitation
Ruoxuan Huang, Yuanxiang Liu, Baoxin Huang, Chaobiao Zhang, Zhuofan Chen, Zhipeng Li
Abstract
OBJECTIVES: To compare the accuracy of an original and two newly designed CAD/CAM scan bodies used in digital impressions with one another as well as conventional implant impressions. MATERIAL AND METHODS: A reference model containing four implants was fabricated. Digital impressions were taken using an intraoral scanner with different scan bodies: original scan bodies for Group I (DO), CAD/CAM scan bodies without extensional structure for Group II (DC), and CAD/CAM scan bodies with extensional structure for Group III (DCE). For Group IV, conventional splinted open-tray impressions (CI) were taken. The reference model and conventional stone casts were digitalized with a laboratory reference scanner. The Standard Tessellation Language datasets were imported into an inspection software for trueness and precision assessment. Statistical analysis was performed with a Kruskal-Wallis test and Dunn-Bonferroni test. The level of significance was set at α = .05. RESULTS: The median of trueness was 35.85, 38.50, 28.45, and 25.55 μm for Group I, II, III, and IV, respectively. CI was more accurate than DO (p = .015) and DC (p = .002). The median of precision was 48.40, 48.90, 27.30, and 19.00 for Group I, II, III, and IV, respectively. CI was more accurate than DO (p < .001), DC (p < .001), and DCE (p = .007). DCE was more accurate than DC (p < .001) and DO (p < .001). CONCLUSIONS: The design of the extensional structure could significantly improve scanning accuracy. Conventional splinted open-tray impressions were more accurate than digital impressions for full-arch implant rehabilitation.