In Situ Modulation of Al Traces and Interlayer Spacing in Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> ‐A2 MXene: Supercapacitor with Ultrahigh Capacitance and Energy Density
Shilpa Kumari, Srinivasan Aagar, Amit Kumar Sharma, Deepak Upreti, Aashi, Garima Agrawal, Vivek Bagchi
Abstract
Abstract Although Ti 3 C 2 T x MXene is known as a unique 2D layered material with high metal conductivity and redox‐active surface, and is widely employed as a supercapacitor electrode, however, its capacitance maximization is severely limited, due to restacking of the MXene flakes. To get around this problem, an innovative etching technique is employed to circumvent the issue of restacking without using a separate delamination procedure. This is done by keeping optimum Al traces inside the Ti 3 C 2 T x layers by tuning the ratio of LiF and Ti 3 AlC 2 precursors at room temperature. Instead of obtaining solitary Ti 3 C 2 T x flakes, the Al‐trace in Ti 3 C 2 T x ‐A2 holds a stable layered structure, facilitates easier electrolyte mobility, and prevent the possibility of restacking. As synthesized material, Ti 3 C 2 T x ‐A2 exhibits excellent gravimetric capacitance of 513 F g –1 at 2 A g –1 with 80% capacitance retention up to 10 000 cycles at a current density of 12 A g –1 . The all‐solid‐state symmetric supercapacitor (ASSS) can deliver a significant gravimetric energy density of 14.5 W h Kg –1 and areal energy density of 49.2 mW h cm –2 . The established technique enables Ti 3 C 2 T x MXenes to improve their capacitive performance and explore their application in energy storage devices.