High performance chitosan/nanocellulose-based composite membrane for alkaline direct ethanol fuel cells
Maša Hren, Michaela Roschger, Viktor Hacker, Boštjan Genorio, Darinka Fakin, Selestina Gorgieva
Abstract
Polysaccharide anion exchange membranes (AEMs) containing chitosan (CS), cellulose nanofibrils (CNFs) and CNFs quaternized with poly(diallyldimethylammonium chloride) (CNF(P)s) were developed for use in alkaline direct ethanol fuel cells (ADEFCs). The resulting composite membranes prepared by the solvent casting process based on an experimental design were comprehensively assessed for morphology, KOH uptake, swelling ratio, EtOH permeability, mechanical properties, ionic conductivity, and cell performance. The fabricated CS-based composite membranes with CNF(P) fillers were superior to the commercial Fumatech FAA-3-50 membrane in terms of Young's modulus and tensile strength (69 % and 85 % higher, respectively), ion exchange capacity (169 % higher), and ionic conductivity (228 % higher). Single fuel cell tests have shown excellent performance of the CS-based membranes with CNF and CNF(P) fillers, as they exhibited up to 86 % improvement in power density at 80 °C compared to the commercial membrane (65.1 mW/cm2 vs. 35.1 mW/cm2) and higher maximum power density at all test conditions.