Chemical absorption of <scp>CO<sub>2</sub></scp> in alkaline solutions using an intensified reactor
Fouad Azizi, Lynn Kaady, Mahmoud Al‐Hindi
Abstract
Abstract Capturing carbon dioxide (CO 2 ) emissions from point sources is critical for a sustainable chemical industry. Several techniques have already been developed and the race is ongoing to meet more stringent limitations at lower operating costs. This study presents the capability of a novel, flexible reactor to achieve high absorption rates at very low power consumption. CO 2 absorption in an aqueous sodium hydroxide (NaOH) solution was used as a benchmark. An air–CO 2 stream made of 30% v/v CO 2 was injected co‐currently with the aqueous alkaline solution in a tubular reactor equipped with woven mesh mixers. The removal efficiencies were measured along the length of the reactor, which operated at total mean flow velocities ranging between 1–2 m/s and gas phase holdups between 10%–30%. Four different mixer geometries were also tested, and the results were analyzed based on the operating conditions and reactor design configurations. While these studies can be further optimized and potentially applied in carbon capture operations, it was found that more than 96.5% of the CO 2 could be removed using different combinations of mixer geometry and operating conditions. This high removal efficiency was reached within a residence time of 400 ms at a low cost of 23.65 .