Direct Imaging of Local pH Reveals Bubble-Induced Mixing in a CO<sub>2</sub> Electrolyzer
Lorenz M. Baumgartner, Aron Kahn, Maxime Hoogland, Jorrit Bleeker, Wolter F. Jager, David A. Vermaas
Abstract
High Resolution Image Download MS PowerPoint Slide Electrochemical CO 2 reduction poses a promising pathway to produce hydrocarbon chemicals and fuels without relying on fossil fuels. Gas diffusion electrodes allow high selectivity for desired carbon products at high current density by ensuring a sufficient CO 2 mass transfer rate to the catalyst layer. In addition to CO 2 mass transfer, the product selectivity also strongly depends on the local pH at the catalyst surface. In this work, we directly visualize for the first time the two-dimensional (2D) pH profile in the catholyte channel of a gas-fed CO 2 electrolyzer equipped with a bipolar membrane. The pH profile is imaged with operando fluorescence lifetime imaging microscopy (FLIM) using a pH-sensitive quinolinium-based dye. We demonstrate that bubble-induced mixing plays an important role in the Faradaic efficiency. Our concentration measurements show that the pH at the catalyst remains lower at −100 mA cm –2 than at −10 mA cm –2, implying that bubble-induced advection outweighs the additional OH – flux at these current densities. We also prove that the pH buffering effect of CO 2 from the gas feed and dissolved CO 2 in the catholyte prevents the gas diffusion electrode from becoming strongly alkaline. Our findings suggest that gas-fed CO 2 electrolyzers with a bipolar membrane and a flowing catholyte are promising designs for scale-up and high-current-density operation because they are able to avoid extreme pH values in the catalyst layer.