Non-destructive compaction quality evaluation of runway construction based on GPR data
Lili Cheng, Ji Lu, Cheng Zhou
Abstract
Assessing the compaction quality of rockfill materials is an essential link in the runway construction. However, traditional on-site limited sampling detection is not only time-consuming and labour-intensive, but also destructive. Common ground penetrating radar (GPR) calculates the relative permittivity of a material by measuring its thickness. Nonetheless, assessing the thickness of runway construction materials poses a significant challenge. To address this challenge, this paper focuses on the Hilbert -Huang transform (HHT) analysis of GPR signal of different compacting materials, and then replaces the traditional method of calculating the relative permittivity by measuring the thickness of materials. At the same time, taking the runway as an example, this work verified a crest factor (CF) index effectiveness in predicting the relative compaction of rockfill material through HHT analysis of GPR signals collected in the field, with an average error rate of 4.03%. Finally, Kriging interpolation method is used to estimate the compaction quality of any point, and the corresponding heat map of compaction quality evaluation is generated to determine the area of insufficient compaction in the construction process.Highlights The GPR method is used for non-destructive testing of the compaction quality of runway rockfill materials;Compaction quality evaluation by multiple indicators of GPR data signal processing.The influence of number of roller passes, materials mix ratios and different rockfill materials on the compaction quality of runway are analysed.The applicability of the GPR method is verified by runway construction tests.