Development of heavy mineral filler based FRP composites for (low energy) radiation shielding application
M. Sarwar Jahan, Shakil Hossain, Mohammed Abu Sayeed, Subrata Chandra Das, Sotirios Grammatikos, S. Y. Pingky, Raju Khan
Abstract
The present study deals with fabricating and characterizing glass fiber reinforced epoxy composites with heavy mineral filler (magnetite particles) for potential low-energy radiation shielding applications. The composite materials were fabricated by the hand layup method. Glass/epoxy composite was used as control sample, and radiation shielding composites were manufactured by mixing 20 and 30% (by weight) magnetite particles with epoxy resin. It was revealed that the tensile properties of the magnetite-modified composites were increased, and the composites containing 30% filler exhibited maximum improvement than the control ones. Further assessment of the composite samples was performed by DMA (Dynamic Mechanical Analysis), TGA (Thermogravimetric Analysis), FTIR (Fourier-Transform Infrared) spectroscopy, water uptake (%), and SEM (Scanning Electron Microscopy) testing. The radiation shielding ability of the control and filler-modified composites was assessed by using a gamma (γ) radiation source (60Co). Then, the shielding efficiency was characterized by radiation-reduced intensity (%), LAC (Linear Attenuation Coefficient), MAC (Mass Attenuation Coefficient), HVL (Half Value Layer), TVL (Tenth Value Layer), and SVL (Sixteenth Value Layer). It was revealed that the 30% magnetite filler content composite experienced relatively good attenuation performance against γ-ray than other studied composites.